Motorization epoxy putty is an adhesive of the consistence of plasteline designed for quick car repairs (without dismounting). Bonds very strongly seals and fills losses. Resistant to vibrations, temperature and exploitative liquids.
Article number:
E-136 Automotive Epoxy Putty – 35g / Pack 20 pcs
E-690 Automotive Epoxy Putty – 200g
TECHNICAL DATA
Colour: orange
Life after mixing: 10 min.
Preliminary hardening (25°C): 45 min.
Full hardening: 12 h
Resistance to temperature: -40°C ÷ 100°C
Validity period: 18 months
FEATURES
- Does not contain solvents
- Easy to use
- Universal
- Bonds seals and fills losses
- Resistant to water and temperature
- Resistant to aggressive chemical agents
- Plastic consistence
- On full cure may be machined (grinding, drilling and threading)
USE
Motorization Epoxy Putty is an adhesive of the consistence of plasteline. Designed for emergency (without disassembly) repairs of mechanical devices. Permanently seals and bonds. Prevents metal elements from corrosion. It is a very good electric insulator. At room temperature becomes very hard after 45 minutes and may be machined (grinding, drilling, threading and so on)
Resistant to weather factors, temperature, aggressive chemical compounds (acids, alkalis, solvents, petrol) as well as exploitative liquids.
It is widely used in car garages, factories, as well as households.
Typical uses include:
- Sealing coolers and petrol tanks
- Repairs of casing and holders
- Filling losses in native materials
- Sealing cracked pumps
BENEFITS
- Safe to use
- just mix and apply
- Bonds to metals, ceramics, plastics
- One product – a lot of uses
- For indoor and outdoor uses
- For uses in industry
- Makes possible to form different shapes
- Allows to reproduce damaged elements
HOW TO USE
- Roughen the surface to be repaired with a sand paper or file.
- Remove all sorts of dirt and degrease (use Cleaning Kit P-102 or Technical Degreaser P-959).
- Mix (by kneading) the same volumes of components A+B until uniform colour is achieved.
- Execute repairs within 10 minutes.
HINTS AND TIPS:
- Heat the components A+B to room temperature before mixing them
- Do not mix larger quantities of components A+B than you can use up within 5 minutes (service life)
- Repair time may be shortened heating the joint with a jet of hot air
- Surfaces that are difficult to bond should be earlier covered with a thin layer of liquid epoxy adhesive (e.g. E-358) and left to cure
STORAGE:
Store at a temperature: 5°C - 25°C. Protect from moisture.
RELATED PRODUCTS:
Epoxy Pastes and Adhesives, Degreaser, Degreaser Aerosol
This information is based on current knowledge company NALMAT Trzebinia and is given to describe the product. It cannot be interpreted as a guarantee of its properties. The customer is obliged to test suitability of the product to certain applications, ensure a safe workplace and comply all applicable regulations.
