Metal epoxy putty so called plastic metal designed for quick repairs of machines and devices. Bonds, seals and fills losses in all metals and their alloys (aluminium, steel, cast iron, bronze, brass etc.)
Article number:
E-174 Metal Epoxy Putty – 40g – 35g / Pack 20 pcs
E-713 Metal Epoxy Putty – 200g – 200g
TECHNICAL DATA
Colour: dark grey
Life after mixing: 10 min.
Preliminary hardening (25°C): 30 min.
Full hardening: 12 h
Resistance to temperature: -30°C ÷ 120°C
Validity period: 18 months
FEATURES
- Quick-curing
- Easy to use
- Bonds, seals, fills looses
- Abrasion resisting
- Resistant to water and temperature
- Dark grey colour
- On full cure may be machined (grinding, grilling and threading
USE
Metal Epoxy Putty has been developed with the idea of quick (without dismounting) repairs of machines and devices. Thanks to its properties it is possible to bond and fill losses and reconstruction of elements made of all metals and their alloys. Typical uses include:
- Reproduction of screw joints, small parts and machine elements
- Filling losses in corroded machine elements
- Sealing cracks in containers
Metal Epoxy Putty is resistant to water, solvents and does not corrode. On cure it may be machined (drilling, grinding, threading, sawing). Metal Epoxy Putty may be successfully used on elements made of wood, ceramics and most plastics.
BENEFITS
- Initial curing takes place just after 10 minutes.
- Just mix and apply to
- One product – a lot of uses
- For repairs of elements exposed to friction
- For indoor and outdoor uses
- Invisible repairs of metal elements
- Allows to reproduce damaged elements
HOW TO USE
- Roughen the surface to be repaired with a sand paper or file.
- Remove all sorts of dirt and degrease (use Cleaning Kit P-102 or Technical Degreaser P-959)
- Mix (by kneading) the same volumes of component A+B until uniform colour is achieved
- Execute repairs within 10 minutes
HINTS AND TIPS:
- Heat the components A+B to room temperature before mixing them
- Do not mix larger quantities of components A+B than you can use up within 10 minutes (service life)
- Repair time may be shortened heating the joint with a jet of hot air
- Surfaces that are difficult to bond should be earlier covered with a thin layer of liquid epoxy adhesive (e.g. E-358) and left to cure
- do no use the putty for bonding/filling PP, PE, PTFE
STORAGE:
Store at a temperature: 5°C - 25°C. Protect from moisture.
RELATED PRODUCTS:
Epoxy Pastes and Adhesives, Degreaser, Degreaser Aerosol
This information is based on current knowledge company NALMAT Trzebinia and is given to describe the product. It cannot be interpreted as a guarantee of its properties. The customer is obliged to test suitability of the product to certain applications, ensure a safe workplace and comply all applicable regulations.
