Colourless, mercaptane, epoxy adhesive of very quick curing time. Reliable and effective for durable bonding materials like glass, porcelain, plastic (except PP, PE, PTFE) stone, concrete, marble, metals and their alloys, rubber, wood. Perfectly bonds to material combinations.
Article number:
E-358 Epoxy 1 min. – 2x12m / Pack 10 pcs
TECHNICAL DATA
Colour: colourless
Life after mixing: 1 min.
Preliminary hardening (25°C): 8 min.
Full hardening: 12 h
Resistance to temperature: -30°C ÷ 80°C
Validity period: 36 months
FEATURES
- contains no solvents
- cures very quickly
- dual-chamber syringe
- colourless
- universal
- high resistance to electric breakdown
- resistant to water and temperature
- resistant to aggressive chemical factors
- after curing may be ground, drilled, threatened
USE
Epoxy 1 min. finds wide application during repairs where colourless and invisible joints/filling are required or where repair time should not exceed several minutes. Thanks to high resistance to electric breakdown it is used for bonding and pouring electronic elements to protect them from moisture, dust, dirt and other pollutants. Epoxy 1 min. is also designed for bonding glass, wood, stone, plastic, rubber, metals, metal alloys and combinations of these materials. Resistant to atmospheric factors, temperature, aggressive chemical compounds (acids, alkalis, solvents, petrol), as well as operating fluids.
Application:
- Jeweller’s craft (e.g. for bonding amber to gold or silver)
- In electronics for bonding elements
- In household for emergency repairs
BENEFITS
- safe to use
- repairs within several minutes
- precise bathing compounds, eliminates losses
- forms invisible joints
- bonds to metals, ceramics, plastics
- for bonding electronic elements
- suitable for interior and exterior use
- for industrial applications
- allows to reproduces damaged thread and elements
HOW TO USE
- Roughen the surface designed for bonding by sanding or filing
- Remove all source of dirt and degrease (use Cleaning Kit P-102 or Technical Degreaser P-959)
- Squeeze proper quantities of components and mix them thoroughly until uniform colour is achieved
- Apply the prepared adhesive to one of the surfaces
- Press the elements together very strongly and leave immobilized until the adhesive cures.
HINTS AND TIPS:
- heat the components A+B to room temperature before mixing them
- do not mix larger quantities of components A+B than you can use up within 1 minutes (service life)
- repair time may be shortened heating the joint with a jet of hot air
- do no use the adhesive for bonding/filling PP, PE, PTFE
STORAGE:
Store at a temperature: 5°C - 25°C. Protect from moisture.
RELATED PRODUCTS:
Epoxy Pastes and Adhesives, Degreaser, Degreaser Aerosol
This information is based on current knowledge company NALMAT Trzebinia and is given to describe the product. It cannot be interpreted as a guarantee of its properties. The customer is obliged to test suitability of the product to certain applications, ensure a safe workplace and comply all applicable regulations.
